ERPXE Community

the tftp on erpxe won't work gives error errors even though it pointpoints correcttly

Could you post what errors you are getting exactly? It helps others identify the issue you are having. Without knowing the errors it is difficult to help resolve your issue. TFTP errors can be caused by a number of things.

While you're at it check this post as it may help resolve your issue.

sorry i tried to upload a picutre but failed.
when I use my vmare to test the pxe i get:
PXE-E11 arp timeout
PXE_e38 tftp cannot open connection
i know what they mean but don't know/( aka failed at ) how to fix them

thanks for the link but no fix

I have this issue on my vm and if I remember correctly it was when I used host adapter. You can use bridged mode but you have to set up a virtual adapter with a separate mac for it to work properly.

I would try booting another computer from your server over lan to determine if the problem is with your vm settings or your tftp settings first. That will at least help narrow down which set up is to blame. I have a system on the bench using my server right now, when it's done I'll check it with my vm and see if I can remember how I had to set that up.

ok will do thank you will let you know once tried
TFTP PROBLEM RELATED TO DRIVERS TRIED ANOTHER COMPUTER WORKED.